Farmall 100 cracked block

NICK D · Jul 16, 2009

I took my engine block to the machine shop to be cleaned up and found it was cracked in several places in between the sleeves and it could not be repaired. So I am looking for another block. Does anyone have a good block laying around they would like to sell? Are there any salvage yards in western Pa or Ohio I can pick one up? Will any engine block work from a regular A or Super A or do I need one specifically for a Farmall 100. Any help would be appreciated.

Daniel H. · Jul 16, 2009

You do not want an "A" block; no provision for a hydraulic pump and a different sleeve OD. The early Super A had a different sleeve OD as well. In 1951 the Super A began using the same block that eventually became the 100. Look for a number cast into your block behind the oil filter 354898Rx. If the first 6 numbers before the R are the same the blocks will be very similar.

Daniel

Anonymous-0 · Jul 16, 2009

Thanks, I'm on the search.

Daniel H. · Jul 16, 2009

That block was also used on the 130 and early 140's, as well as the Super C, 200, 230, and 240.

Anonymous-0 · Jul 16, 2009

block can be repaired by putting ford tie bolts between cylinders at bottom don"t worry about top cracks head gasket will seal sleeves

Farmall 100 cracked block

NICK D

Member

Daniel H.

Member

Anonymous-0

Well-known Member

Daniel H.

Member

Anonymous-0

Well-known Member

Similar threads