(800) 853-2651
SHOP NOW

PTO part for M Farmall

C

CHIEFEAVES

Member
Need Oil Seal IH Part 59398D for the PTO on my M, however, IH no longer carries this part. Where should I go to try and locate this part.
Thanks. Harley
 

Case-IH probably DOES NOT have that exact part number, but they will have a seal that WILL work. I got one just a few years ago for my M.
 
I can generally get those from the local auto parts store. They can cross reference that #.

At least our local NAPA can.

Let us know if that doesn't work, I have several good Case IH dealers in my area. They got me all the seals and gaskets for the front of my transmission case.

Gene

Gene
 
Evidently the orignal owner purchase the PTO at a later date in that the diagram in the parts manual shows this as for later ser #s. This oil seal has 59398D stamped on it. It appears to be a double seal that fits behind the bearing instead of in front toward the opening. It is about 3/4" wide and the center hole is about 1 7/8". the outside measures about 2 7/8". Maybe this better explan it. Thanks. Harley
 
(quoted from post at 12:32:36 07/08/09) Evidently the orignal owner purchase the PTO at a later date in that the diagram in the parts manual shows this as for later ser #s. This oil seal has 59398D stamped on it. It appears to be a double seal that fits behind the bearing instead of in front toward the opening. It is about 3/4" wide and the center hole is about 1 7/8". the outside measures about 2 7/8". Maybe this better explan it. Thanks. Harley
Click to expand...

You just described to the letter what the original seal looks like, and no, that one is no longer available, but that number has been replaced by a newer, modern style that is actually superior to the original. The new seal is much thinner, about 1/2 the thickness. It is not necessary, but you can install 2 of the new seals in place of the original.
 
You must log in or register to reply here.

Similar threads

C
Farmall 400 With 0-264 Engine Radiator Part Number Location.
Replies
5
Views
216
cal556
C
A
IH 140 antifreeze, oil, oil filter, plugs, points, hyd fluid
Replies
4
Views
258
BarnyardEngineering
BarnyardEngineering
P
Farmall m starter switch
Replies
7
Views
370
Duner Wi
D
J
NAPA oil filter no. For a Farmall M
Replies
5
Views
460
DeltaRed
D
M
IH 454
Replies
4
Views
254
derwen1959
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top