CHANGE ENGINE FROM LP?

donald schnupper · Jul 6, 2009

HOW BIG A JOB IS IT TO CHANGE A ENGINE FROM LP TO GAS? AND CAN IT BE DONE? THANKS DON

John A. · Jul 6, 2009

Donald, 1st ?. What are you changing over???
You will need gas tank, fuel lines, gas carb, an you may need a gas intake. any mounting hardware too.
Back to my 1st ? what are you changing over,,,,, you may have rare tractor, or you may have a pretty common one! You should take a hard look at before you mess up a rare tractor if that is the case. Hope this helps.
Later,
John A.

donald schnupper · Jul 7, 2009

THANKS FARMALL

Harold H · Jul 7, 2009

What model Farmall? Need to determine if factory or field conversion.

Harold H

donald schnupper · Jul 7, 2009

FARMALL 400

John A. · Jul 7, 2009

Donald, A Farmall what????? Model, Serial#, a few pics maybe?
Later,
John A.

mkirsch · Jul 7, 2009

Too many parts required. You may as well buy a gas 400 from the beginning.

Why do you want to convert it back? LP is clean and efficient. The engine will last practially forever with none of the problems that old gasoline engines have with modern gas. Propane has always been propane. Can't say the same about gasoline.

John A. · Jul 7, 2009

Donald, Waaay too many part needed to change over to gas. With enough money anything can be donebut there is a point is it realy cost effective to do it or start a hunt for a nice gas model.

IMO too you have a more desireable tractor in an 400 LP than a 400 gasoline. A 400 LP is a lot more rareer tractor than a gas. $2500 should put in the ballpark for a good 400 gas
Later,
John A.

CHANGE ENGINE FROM LP?

donald schnupper

Member

John A.

Well-known Member

donald schnupper

Member

Harold H

Well-known Member

donald schnupper

Member

John A.

Well-known Member

mkirsch

Well-known Member

John A.

Well-known Member

Similar threads