Super W6 coolant leak

Scott in CT · Jul 6, 2009

Hi My SW6 just started to leak coolant from the lower rubber hose. After draining and looking everthing over the lower leaky hose looks the best out of all the hoses so I would like to replace all the hoses. My question is can all the hoses be replaced without takeing any of the tractor apart? Some of these are very short and looks almost impossible to replace without removing the pump. Thanks

rustred · Jul 6, 2009

just finished doing the very same job on the same tractor this morning.simplest way to get at the bypass hose is to remove the thermostate housing from head.that way you can just slip the hose on and then slide the housing in and replace gskt. and bolt it back on . the upper and 2 lower are a straight forward procedure.nothing needs to come off such as rad.hose sizes are top 2 1/8, bypass 1 1/2, btm. 2"

Super W6 coolant leak

Scott in CT

New User

rustred

Well-known Member

Similar threads