H Transmission Noise

Anonymous-0 · Jul 1, 2009

I just noiticed a ticking noise (similar to pining in an engine)that seems to be associted with the clutch. I hear the noise and pushing in the cluth the noise stops. I had greased the throw out bearing zerc I think with one pump, maybe two, possibly three shots. Could too much grease be a problem?

Thanks,

Rich

Janicholson · Jul 1, 2009

Probably not. There are several possible answers.
It could be the coupling between the clutch shaft and the trans input. It could be the constant mesh gear with a chip in a tooth. it could be a bearing (front trans, or intermediate (between shafts), or the lay shaft bearing. If it is being lightly worked (Driving up a small hill in 3rd) does the noise go away? JimN

Anonymous-0 · Jul 2, 2009

Thanks for the ideas. The noise just started. The clutch free play needs adjusting, however, I don't think that could be the cause.

Rich

H Transmission Noise

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Anonymous-0

Well-known Member

Similar threads