Super W6 - TA Grease ?'s

Belleville Neil · Jun 28, 2009

I"ve just revived my old tractor after 3 years of giving it a rest. A rebuilt starter, new switch and new fluids and its running again. I start holidays tomorrow and have work for the tractor, but I can"t remember grease points and what type of grease to be using. Neither topic is covered in the parts or service manual so I"ve order the operator’s manual but it won"t arrive for 7 days. Can anyone point me to a reference that shows the grease points on this tractor? Any grease type recommendations? Thanks for your help!

Janicholson · Jun 28, 2009

Mobil 1 synthetic chassis grease is fine. Also Ford specification graphite based chassis grease is fine. All other chassis grease types are probably OK as well. No grease is the bad guy.
If you look at every linkage and pivot point there will be a fitting. From steering shaft to rear axles there are zerks. On those where grease will cone out visibly, grease until fresh grease comes out. On those that internalize the grease I would go with three or four pumps on the handle. Wipe the fittings befor and after greasing. JimN

Anonymous-0 · Jun 28, 2009

walk around your tractor:look at steering linkage,spindles, clutch and brake pedals, clutch shaft, release brg by unbolting plate under clutch,water pump,rear axle brgs,steering box,this is pretty much a self explanitory thing to do. unless you dont know how to load a grease gun. i have had roughnecks work for me that could not do this.one even said this grease is red and the gun has blue grease is that ok?

Super W6 - TA Grease ?'s

Belleville Neil

Member

Janicholson

Well-known Member

Anonymous-0

Well-known Member

Similar threads