Touch Control

S/C BOB

Member
Well I brought my S/C Farmall home yesterday from getting it painted it sure has been a longtime since I drove it about 7 years this August. How sweet it is to just jump on it and go for a ride. The touch control is working on the left side but nothing on the right..I did change the control rod the other one broke. Any suggestions also the water pump looks like it is leaking I thought about getting a rebuild kit, good idea or not or replace the pump?
 
I'll have to ponder on the Touch Control issue. Do you have a manual for it? There's an adjustment or two in the linkages that might be in play. Failing that, a rebuild will be in order. Not a bad project, but unusual. 14,332 O-rings and you should have 8 of them left over when you're done. A manual or the parts catalog illustrations are absolutely necessary for that project, but neither gives any guidance as to which O-rings go where, nor which eight will be left when you're done. All quite do-able, though, as long as you have a CLEAN place to work. The kitchen table is preferable to a dusty grimy workbench. I got evicted and did my work on top of butcher paper rolled out on the bench. 8^(

As far as the water pump, I have my old one sitting in the box waiting for a day when I have nothing else to do and can get access to a press to see if I can rebuild it. There's some touchy tolerances in there. For the meantime, the replacement seems to be working quite well. I'd advise the replacement route. Quick and easy.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top