H Model Lighting Switch

VFMerc · Jun 18, 2009

I'm replacing the wires on an H Model with a 6 volt system. The back of the lighting swicht may need to be replaced (pretty corroded). Can anyone tell me where I might find a replacement. I found a switch on the OEM site but it didn't seem to have the fuse or windings. I don't have to have an original but am not sure I can wire the replacement version. vfmerc

David G · Jun 18, 2009

I think steiner.com may have the parts.

Jim Guarino Agri-Services · Jun 19, 2009

If you have a cutout relay system, there is no correct reproduction 4 position light switch available. You will need to find a good used one, or use a push-pull light switch for a cutout relay system. If you have a voltage regulator, you will need a 3 position switch which is available as a reproduction item.
Agri Services

H Model Lighting Switch

VFMerc

Member

David G

Well-known Member

Jim Guarino Agri-Services

Member

Similar threads