(800) 853-2651
SHOP NOW

B414 change to 2-way hydraulic loader

R

ronb.vip

Member
I have a B414 in good shape ser #22376. Factory power steering, remote and 3 pt hitch. It has a dual stage pump, and I want to convert the McCormick trip bucket loader to a 2 valve 2-way system. If anyone has done this, I sure would like to know how to get a constant pressure feed and still have a useable 3 point hitch without turning knos and taps.
Thanks
Ron
 
Hi, cut the pipe that go from the pump, hitch one,weld a fitting at the cut end, run a hose, from the fitting, to the IN of the loader valve.On the pipe, that go in the hitch valve, weld a fitting too, run a hose from the OUT of the loader valve, to the fitting weld on the pipe to the hitch. The best place to cut, is under the fuel tank.Now you can run the loader and the hitch without turning knobs. Bernard le mecano Quebec Canada
 
I have power steering on the tractor. Would this affect my power steering, I have a 2stage pump, one for the power steering, and one for the main hydraulic system, would this still work?

Thanks

Ron
 
hi Ron, Bernard has it correct and will not interfere with PS. The 434 and 384 (same as B414) that we had a 1500 series loader installed also had an additional hydraulic dump line that was plumbed from the bottom of the control valves into the filler hole at the back of the seat with low pressure hose a regular pipe T into the filler hole and the filler plug installed on top of T. If you want both up and down pressure on your loader you will also have to change the hydraulic cylinders to the double acting type.

JimB
 
Hi, cut only the pipe that feed the hitch system. The steering in on another circuit. Your steering will work like a charm. Bernard le mecano Quebec Canada
 
You must log in or register to reply here.

Similar threads

M
Cockshutt 540 hydraulic question
Replies
6
Views
216
Mike Volpp
M
M
Ford 3600 diesel with Loader
Replies
0
Views
193
ManaFarmandForge
M
A
Yanmar 226 Hydraulic issues with loader
Replies
2
Views
302
winston-HT
W
J
Advice needed on adding hydraulic remote for quick attach on industrial loader tractor
Replies
10
Views
672
jacks
J
J
Ih 674 hydraulic problem
Replies
5
Views
529
Highwayman
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top