560 Hydraulics

Anonymous-0

Well-known Member
I had developed a growl and the hydraulics/power steering quit working.I pulled the pumps out and the drive gear on the splined shaft had slid forward and was slipping on the pump gear.The spline shaft seem to be ok.I can slide the gear back onto the splined shaft and seems ok but I can't see what holds it in place.I guess I am looking for suggestions for what to do next. thanks
 
Remove plate on bottom clutch housing retained by two bolts,then look up just behind clutch is a large pipe plug,remove it put bolt and washer back and tighten.Scott
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top