M ENGINE TRICKS

Anonymous-0 · Jun 9, 2009

HEY GUY'S JUST HAD MY FIRST DEAD WEIGHT PULL WITH MY M. WHAT FUN I HAD ! 5500 WEIGHT ON THE BACK AND PRESS WHEELS IN THE FRONT = TIRES ABOUT 3.5 ft OFF THE GROUND. 2ND PULL 125lbs ON FRONT PRETTY GOOD. THE QUESTION I HAVE IS HOW MUCH CAN I MILL THE STOCK HEAD[ I'M PREETY SURE IT NEEDS FRESHENED UP]. MOTOR DYNO'S 45 HP AT 540. AND IS THERE ANY OTHER NEAT TRICKS OUT THERE THAT ARE RELIABLE? I STILL PLAN TO DO PLOW DAY'S. ANY HELP WOULD BE GREAT.

roy prins · Jun 9, 2009

some things that i did-- take the venture(dont know the spelling)out of the carb and bore it out another 1/4 inch -- it will add some wind to your sales-- take the oil out of your air cleaner when you pull then pull with a luke warm motor- not hot not cold-shave the head if you like-but unless you take at least a 100 thou. off you wont see the diff. with that said you will add 5 to 8 hp

M ENGINE TRICKS

Anonymous-0

Well-known Member

roy prins

Well-known Member

Similar threads