Anonymous-0
Well-known Member
I pulled the water pump and outlet casting on the SH this morning and BOTH gaskets clearly show leakage. They are wet at the bottom. When I removed them some of the gasket stayed with the block and some stayed on the water pump. Interesting thing is that when I scraped the remains off you can clearly see that the leak was not from between the gasket and the metal mounting surface but through the gasket itself (cross sectionally). What's up with that?!!?! I will take the previous advice and get some IH gaskets (and a new lower connecting pipe while I'm at it). I don't want to take this apart again!!!