I9 emblems

Dave Eklund · May 28, 2009

my father has a I9 that has been painted with a brush and has no decal or emblems we are looking for the correct decals and front grill emblem when we repaint it the serial # off the tag is ICB13258 model#I9 it has no pto or hydrolics but does has factory duals with the big cast iron spacers we were told it originally came from kansas where it used to pull a grader

glennster · May 28, 2009

front emblem should say international, oem tractor parts will have the decals.

Dave Eklund · May 28, 2009

the # s are what I can't seem to find any info on the ICB# all I can seem to find is KCB or WCB the model # is I9 and I have double checked the ICB# would like to put a pto or hyd pump on the tractor to make it a little more useble we also have a 1957 820 JD with no pto or hyd pump and a 51 case model S without also but the two old model A deere's have pto's hyd and 3 poit hitches I like the big tractors don't see alot of them around here.

Chris NW Ind · May 29, 2009

Wow. How about a close up of the hitch on that tractor. How thick is the tongue? My W9 is light years from an M with regards to the hitch, but your I9 is something else entirely.

PTO from a W9 should work fine. I assume the countershaft will be setup to drive it.

Chris B.

Dave Eklund · May 29, 2009

Ya Chris the hitch is big it it actually bigger than the one on his 820 deere and that tractor looks a lot bigger than the 9 i'll try to get some better pics this weekend when we put the other dual on those cast spacers are heavy and akward we picked the other one up with the backhoe to put it on

Chris NW Ind · May 29, 2009

I know someone with a JD 80. Huge tractor but the hitch didn't look any heavier than an early M. Leastways, it didn't seem nearly heavy enough for the tractor.

Is your hitch factory? My W9 parts catalog doesn't cover the industrials. The industrials supposedly have a heavier front axle, too.

It would be neat to put a W9 and I9 side-by-side and compare.

Chris B.

Haas · May 29, 2009

The front grill emblem will be difficult to find!!! It should say "International" and no one is making aftermarket emblems in the size for the I-9. I've been looking for one for my I-6 for a while now and so far no luck. I think the one for the I-9 may be a little larger than the one for the I-6.

Dave Eklund · May 31, 2009

found an International emblem for the front a little beat up but better than none at all the grill of the tractor is in really good shape except one of the previous owners cut the bottom bar off it we ended up buying a beat up griil that has the bottom bar in good shape to cut out and weld in the good grill it also had an emblem. Chris I took some close up pics of the hitch they are attatched and got the duals all mounted tractor looks good now it is just at 8 feet wide

I9 emblems

Dave Eklund

Member

glennster

Well-known Member

Dave Eklund

Member

Chris NW Ind

Member

Dave Eklund

Member

Chris NW Ind

Member

Haas

Well-known Member

Dave Eklund

Member

Similar threads