560 dual remotes

farmallmechanic05 · May 22, 2009

hey fellas, i have a 560 with one set of remotes and fast hitch, how hard would it be to put on a second set of remotes? many thanks... Brad

armand tatro · May 22, 2009

Go to a tractor salvage yard, get the parts you need, and put them togather. Those tarctors were designed for three valves and therefor can be retrofitted. My BIL and I did this on his 806 years ago and had no problems. Armand

KY PLow Boy · May 23, 2009

What is the purpose of the first lever on the remote valves. Our 460's first lever is hooked to a valve bank in the center under the dash and it has no place to plumb any hoses to the valve....it's sealed?????? Thanks for any help

Rootsy · May 23, 2009

If you have 3 valves total... 2 remotes and 1 tel-a-depth for fast hitch then the middle lever is plumbed such that the fittings are between the bottom of the valve and top of tranny... lovely to get at. The inner lever runs the circuit that has outlets under the fuel tank on the sides of the casting... 2 out the right.. 2 out the left.

KY PLow Boy · May 24, 2009

We have a loader on it and for it to have hyd power the middle lever has to be all the way forward, which gives our right side couplers under fuel tank pressure. Those lines come out of the top right side of the valve bank, and the couplers going to the rear of the tractor come out of the same valve bank, but out of the bottom like you were saying at the top of trans. The valve bank in the center under the dash is connected to the inner lever but doesn"t have any lines or couplers coming from it.

560 dual remotes

farmallmechanic05

New User

armand tatro

Well-known Member

KY PLow Boy

Member

Rootsy

Member

KY PLow Boy

Member

Similar threads