Super C pto seal

thumbanger · May 22, 2009

What is the best way to change pto seal. Thanks in advance

Harold Hubbard · May 22, 2009

Get a dent puller and screw it into one side of the seal, pop it out and tap in a new one. If you don't have a dent puller, fiddle around with a screwdriver or punch, and destroy the old seal, bend it up enough that you can get hold of it with pliers and pull it out.

juniur · May 22, 2009

drill a hole in the seal and screw a sheet metal screw into the seal and pull it out with claw hammer.

GA Dave · May 22, 2009

I pulled all this out of my IH 240 Utility with a HF seal puller. Replaced with one thin seal and working fine. David................

thumbanger · May 22, 2009

Thanks all will let you know what happens.

Cub149 · May 23, 2009

As you can see from GA Dave's photo, a sheet metal screw wouldn't be able to pull that out. Believe me, I've tried.

Super C pto seal

thumbanger

Member

Harold Hubbard

Member

juniur

Member

GA Dave

Well-known Member

thumbanger

Member

Cub149

Member

Similar threads