(800) 853-2651
SHOP NOW

IH 666-Need Help!!

B

BobHnwOh

Member
My neighbors planter tractor,left brake got smokin hot,looks like the adjuster is ball and socket,it's not pushing back on the band,is there a snap ring behind the ball and socket??TIA.
 
The actuator has stuck open and is not returning. You will have to remove the brake assembly, take the three springs loose that hold the actuator together and clean up the area (ramps) where the 5 balls operate. Once your inside you can see what is wrong. Remove the outside cover, you"ll have to pry and work it off of the 2 dowels (maybe 1 dowel) then disconnect the ball nut adjuster and work the actuator from the pedal and out of the brake housing. If you end up replaceing the disks you will need more shims than you have. Note on the actuator which side is out, accidentally turning it over can cause a new set of problems.
 
Red, what would those new problems be? Isn't the actuator disks and connecting arms all the same size so they could go either way? Just wondering.
 
If the ramps in the expander are worn and you can find some HI-TEMP (copper based) anti-seize it can help til you can get new ones. Also backing up tends to snap them loose.
 
You must log in or register to reply here.

Similar threads

M
IH 350 U air filter and steering parts
Replies
4
Views
201
Janicholson
Janicholson
S
IH 404 Rear Hub Snap Ring Removal
Replies
8
Views
526
used red MN
U
B
Ym146 brakes
Replies
3
Views
167
bmaverick
bmaverick
S
Oliver 1650 - right brake
Replies
1
Views
206
greg krush
G
That_guy
Need help with 8N Brake pedal alignment
Replies
2
Views
340
That_guy
That_guy
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top