(800) 853-2651
SHOP NOW

pto shaft loose

B

Bill Teeters

New User
My super c pto shaft is leaking and loose. I took the pto off the tractor and the shaft is just flopping around. I need to pull the gear with a puller, I think. I can see some of the casting has broken and it is behind the gear. Is the pto ruined or will a new seal hold the oil and shaft. The tractor is used for grass cutting and my son took the over running off and I did not notice it. Where can I get a pto if needed? Should the bearings all be changed?
 
(quoted from post at 23:41:50 05/17/09) My super c pto shaft is leaking and loose. I took the pto off the tractor and the shaft is just flopping around. I need to pull the gear with a puller, I think. I can see some of the casting has broken and it is behind the gear. Is the pto ruined or will a new seal hold the oil and shaft. The tractor is used for grass cutting and my son took the over running off and I did not notice it. Where can I get a pto if needed? Should the bearings all be changed?
Click to expand...
 
You must log in or register to reply here.

Similar threads

C
Super C input shaft seal replacement
Replies
1
Views
131
Charlie M
C
B
Ford 2000 PTO shaft seal leaking
Replies
2
Views
163
Bennett French
B
P
856 pto driven gear removal
Replies
5
Views
300
Janicholson
Janicholson
J
IH 154 PTO shaft bearing
Replies
0
Views
67
John in Ct
J
M
IH 350U cam shaft gear keyway
Replies
5
Views
309
Bob M
Bob M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top