350 engine in an H

Justin Schiferl · May 15, 2009

I am trying to transplant a 350 utility engine into an H farmall. The only problem I am running into is that the 350 U cover has the mounting points on it and they hit the frame. Has anyone out there attempted this swap before? I was going to use the H cover and enlarge the bolt holes, but the mounting hole pattern for the hydraulic pump is different than the H. Should I just get the cover from a 350 rowcrop?

rustyfarmall · May 16, 2009

Yes, you need the front cover from a Super H, 300, or 350 rowcrop.

RustyR · May 16, 2009

I'd think that 350u engine would be worth quite a bit more than than an H engine, and the tractor would be messed up afterwards as an antique. I've got a cheap H core engine if you're interested.

Justin Schiferl · May 24, 2009

Thank you for the information I got a rowcrop cover and it works. I response to saving a 350 u engine. That is what I am doing, I am making a tractor from about six parted out tractors. It follws the Johnny cash thoery, and is putting a lot of cast off parts back into service.

350 engine in an H

Justin Schiferl

New User

rustyfarmall

Well-known Member

RustyR

Member

Justin Schiferl

New User

Similar threads