Ranch Hand
New User
Can a model A front end be used on a model BN and if it can what is the difference between that and a regular model A? Thanks for your help.
- Thread starter Ranch Hand
- Start date
Janicholson
Well-known Member
An A is an offset tractor. The rear axles are different length. The front axle is also offset to the right, and pivoted off center. It is possible (and has been done many times). The whole front casting is needed. It will require steering system changes as well. The wheels will not follow the same track unless modifications are made there as well. JimN
Zach Bouchard
Member
A bn is an offset tractor. The standard B only the driver is off to the side. The whole front casting would need to be replaced in order to put an a front end on it. The grill may also be different. The motors are the same so it should mount up if you got a different front casting.
Anonymous-0
Well-known Member
The BN is not offset and you can put the A front assy on a BN and set the wheels to track with the rears but when you turn the left wheel wont turn the same as the right one but it will work and has been done some as some believe that makes them more stable so the tractor wont upset as easy its your tractor do as you please but it will work. You mite not need the front wheels to track with the rear. What is your reason for asking.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy