MW kit options

Anonymous-0 · May 10, 2009

I bought a '47 M Farmall two months ago at a farm sale of the deceased owner. I have heard from others who knew him better that the engine has a M&W crank. Also I belive it has a M&W piston kit, because it is hard to turn over. I have never heard of a M&W crank, was this a stroker kit, if so how much stroke? Also does anyone know of all the M&W engine kit options for a Farmall M? thanks

colekicker · May 10, 2009

If it's a M&W crank, it would be 5 3/4 vs 5 1/4 being the stock stroke.

Owen Aaland · May 11, 2009

It has been a long time since I worked on one but I thing the displacement ends up somewhere about 324 C.I.D.

supermpuller · May 11, 2009

MW stroker motor 1/2 in stroke 4.25 bore, 326 cu.

randy hall · May 11, 2009

like the other fellows said, m+w cast iron crankshaft gives you a half inch more stroke. you would have to use m+w pistons with this crankshaft to have the in in the right place. only 4" for m's , 4 18" for super m or most 400's. 4 14" available for late 400 and 450's. during the m+w piston era they made flat top overbore kits then turbodomes with three different compression heights on the domes. m+w advertised 60 horsepower for the m with their crankshaft.

randy hall · May 11, 2009

forgot to mention it would be 289 cubic inches.

MW kit options

Anonymous-0

Well-known Member

colekicker

Member

Owen Aaland

Well-known Member

supermpuller

Member

randy hall

Member

randy hall

Member

Similar threads