The Oiler Gear is in!

EZ · May 8, 2009

Thanks to DWarack,
I got a nice oiler gear from him yesterday, and put it in today.
The trans has new seals and gaskets. The axles have new seals and the seal surfaces have been built up and ground back to size to fix some deep grooves from the old seals.

Now we're cookin' with gas!

EZ · May 9, 2009

Just an update.
Last evening I finished putting in the diff. with new seals on the bearing retainers, including new rubber O-rings.
Today I'll finish it off by removing paint from the top cover and installing back on tranny.
Then it's time to finish putting the finals back together.

It's a slow process, but like I have always said:

It does not have to be ready Monday morning!

Ha, ha.

(quoted from post at 17:20:14 05/08/09) Thanks to DWarack,
I got a nice oiler gear from him yesterday, and put it in today.
The trans has new seals and gaskets. The axles have new seals and the seal surfaces have been built up and ground back to size to fix some deep grooves from the old seals.

Now we're cookin' with gas!

The Oiler Gear is in!

EZ

Member

EZ

Member

Similar threads