oiling hub bearing on fan on Cub

Farmallb · May 6, 2009

What and how much do I have to remove to access the screw to oil the hub bearing. I know how to do the actual oiling process, but did it on a B not a Cub

screwstick · May 6, 2009

The screw can be accessed from the side without having to remove anything if you have an oiler with a long spout or a syringe with a flexible tube on it.. Have some rags or a small container ready to catch the extra oil that will spill out when you rotate the hub.

mkirsch · May 7, 2009

You shouldn't need to remove anything.

Owen Aaland · May 7, 2009

Fill it up with the hole above horizontal. Turn the hole down and let the excess drain out. There is a stand pipe in the housing that will keep the oil at the correct level.

oiling hub bearing on fan on Cub

Farmallb

Well-known Member

screwstick

Member

mkirsch

Well-known Member

Owen Aaland

Well-known Member

Similar threads