Farmall H wide front end

Anonymous-0 · May 4, 2009

I have a Farmall H that I would like to put a wide front end on. I would like to know if there is any other differences in a wide front for a M verses an H besides the mounting plate. IH or aftermarket. Thanks,
Dan

Janicholson · May 5, 2009

Yes there are differences, but the basic axle spindle systems (factory) can be interchanged with modification. Aftermarket axles often use the same axle for either, but again the differences are in the bracketing. A "Y" brace to the rear of the axle is the most difficult part to modify. The Kit axles will be setup for the correct frame width, Ms are 20" Hs are 18. JimN

Farmall H wide front end

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Similar threads