M hydraulic auxilliary control valve, latch removal

littlefarmer · Mar 7, 2009

Here's a stumper question for any Farmall experts out there: I have one of those auxilliary hydraulic control valves on my M, that sits under the gas tank and plumbs into the filler inlet.

Does anyone know how to remove the little latch lever that hold the control arm in the "off" position when you are not using the valve. Does it just pop out with a screw driver?

randy hall · Mar 7, 2009

you rotate it out of the way.

littlefarmer · Mar 7, 2009

Thanks Randy, but I wanted to know how to "remove" it from the casting...do you pry it out from the casting?

D Slater · Mar 8, 2009

Remove the stop pin and it threads out. Unless it already turns free you may want to soak with your favorite loosener for a while.

littlefarmer · Mar 8, 2009

Thanks for the advice! I would never have guessed that it threaded out.

M hydraulic auxilliary control valve, latch removal

littlefarmer

Member

randy hall

Member

littlefarmer

Member

D Slater

Well-known Member

littlefarmer

Member

Similar threads