The three armatures each have 23 commutator segments but have not yet checked as to how the armature pole to commutator segment offset compares between them.
As the conversion of the baler motor is proving to be more difficult than I had envisaged, I am taking your advice and will have the switch post on the S/A motor replaced with a threaded stud as an easier way out.
Thanks again for your time, Sid.
As the conversion of the baler motor is proving to be more difficult than I had envisaged, I am taking your advice and will have the switch post on the S/A motor replaced with a threaded stud as an easier way out.
Thanks again for your time, Sid.