Manifold Torque Question

Anonymous-0 · Apr 29, 2009

I just order a replacement manifold for my working H and need the torque specifications and sequence. Thanks for your help.

Bob Kerr · Apr 30, 2009

Just start out lightly snugging the center bolts first and the swap sides till you get to the ends, then start back in the center and tighten then up good and work to the outside like before. If you use a 3/8 ratchet tighten up good and tight, and if a 1/2 ratchet just tight. Run for a bit to get hot and redo the whole process. You will want them all the same tightness so if you use a torque wrench just make them even. I know of no correct spec.

Manifold Torque Question

Anonymous-0

Well-known Member

Bob Kerr

Member

Similar threads