schwartz wide front

bbaro · Apr 26, 2009

i am sure this question has been asked, will a scwartz wide front that came off a super mta fit on a farmall h or super h? thanks

Anonymous-0 · Apr 26, 2009

The Schwartz front end will fit with some adaptations. We changed one from an H to an M. You may have to drill some new holes in the plates that bolt to the frame. May also need a cutting torch and welder. Not big changes but basic fitting to the smaller frame.

Chris NW Ind · Apr 26, 2009

Steering arm bolt pattern is different, but you can buy the proper part.

Chris B.

Steven f/AZ · Apr 26, 2009

I swapped a Speeco wide front from a 450 to an H...

The main 4 bolts to the lower bolster casting are the same from an H up through a 1256 (I've measured). The rear supports to the frame rails will be different as the SMTA is wider than the H.

The steering arm bolt pattern is different, as well. I just used a torch and slotted out the holes from the 450 arm to fit my H (cheapest solution). I vise-gripped the H lower bolster to the 450 steering arm and slotted the holes to fit.

schwartz wide front

bbaro

Member

Anonymous-0

Well-known Member

Chris NW Ind

Member

Steven f/AZ

Well-known Member

Similar threads