Al L. in Wisc.
Well-known Member
If a person could locate the 3 1/2" X 16" bucket cylinder for an IH 2001 loader, what would it cost? Any guesses? Or would it be easier to acquire a phoney birth certificate? Thanks in advance for any input.
- Thread starter Al L. in Wisc.
- Start date
Our Phone System is Down!
Please use the Contact us Form
We are working to resolve the issue ASAP! Thanks for your patience!
Anonymous-0
Well-known Member
If you are looking for any replacement, Fleet Farm or Blains Farm and Fleet depending on what part of the state of Wi. you are in, should have one, if you are looking for the original one replacement try,www.batescorp.com
Howdy
I have one that size in the repair shop right now. The ones at Fleet Farm are totaly different and rated at less PSI, they are on sale $78.00. The guy at the hydraulic repair shop in Shawano Wi. said it would cost $400.00 to build a matching one for me. Hopefully he can repair mine, although it is very old.
Bob S.
I have one that size in the repair shop right now. The ones at Fleet Farm are totaly different and rated at less PSI, they are on sale $78.00. The guy at the hydraulic repair shop in Shawano Wi. said it would cost $400.00 to build a matching one for me. Hopefully he can repair mine, although it is very old.
Bob S.
OP
OP
Al L. in Wisc.
Well-known Member
OUCH! I too hope he can repair yours. Whatcha got your loader on? That close to Black Creek, I imagine you may have checked there. I see Triple H and then the one near The Launching Pad - I've had smelt, burgers, brews there. Farm Inn In and Bult's Bakery are good stops also. Saw a multitude of hard-water fisherman on the lake in February.
Howdy
Black Creek is south of us, have not checked there, but want mine rebuilt so I have matching cylinders on the bucket. It's nothing fancy, 1950 M, had a hard life, but still runs strong, fired right up after sitting all winter. The guy told me $80.00 for complete rebuild, I only mentioned that he could build one identical from scratch in case some restorer had to have exact replacement, but $400.00 is out of my price range, I would have to go with 2 of the Fleet Farm cyl in that case. I may slowly restore my M, but I have to keep it all together as much as possible.
Bob S.
Black Creek is south of us, have not checked there, but want mine rebuilt so I have matching cylinders on the bucket. It's nothing fancy, 1950 M, had a hard life, but still runs strong, fired right up after sitting all winter. The guy told me $80.00 for complete rebuild, I only mentioned that he could build one identical from scratch in case some restorer had to have exact replacement, but $400.00 is out of my price range, I would have to go with 2 of the Fleet Farm cyl in that case. I may slowly restore my M, but I have to keep it all together as much as possible.
Bob S.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy