Farmall H clutch shaft ring with tapered bolts

slydog · Apr 20, 2009

Anybody know where I can get the clutch shaft ring and tapered bolts and rubber washers that connect the clutch shaft to the rear input shaft?
My bolts are worn and the ring has oblong holes.

Wayne in MN · Apr 20, 2009

Your nearest salvage yard is likely to be the least expensive.

Nebraska Cowman · Apr 21, 2009

I have some

Underwood · Apr 21, 2009

I just replaced most everything you mentioned on my "49 M. The tapered bolts are still available from IH but expensive, about $24 each (x4). The rubber washers and the metal cups they set in are available also for about $4.50 per set (x8). I didn"t replace the ring, wasn"t worn too bad so I don"t know what it costs. With what I know now, I would recommend that you at least talk to a local machine shop about the bolts and ring. The shop could build up the bolts and turn them back down to the correct diameter and could also weld in and re-drill the holes in your worn ring. Might be cheaper.

Bob Kerr · Apr 21, 2009

Get new bolts and rubber rings at IH. As for the ring, I tried like everything to find a new one. I settled for a used one that wasn't worn too bad. Welding might be an option on that but I can tell you that ring is very much hardened and is shot peened to boot. Also if it isn't machined just right, you will get a wobble on the clutch shaft.

Farmall H clutch shaft ring with tapered bolts

slydog

Member

Wayne in MN

Well-known Member

Nebraska Cowman

Well-known Member

Underwood

New User

Bob Kerr

Member

Similar threads