Kevin are you out there

Blackland Dan · Apr 20, 2009

I talked to you a while back about a TA for a 300. I need to talk to you again.

Thanks, Dan

Kevin Meier · Apr 20, 2009

I"m here if you were talking about me

Anonymous-0 · Apr 21, 2009

Hi Kevin, thanks for the reply. Do you still have the reman TA for the 300?

Kevin Meier · Apr 21, 2009

I have only 1 for a 300 with a belt pulley. There are 3 other part #'s that go in the 300 without belt pulley. I will need the tooth length and bearing i.d. off of the back gear.

Anonymous-0 · Apr 21, 2009

I"m sending you an email

Kevin Meier · Apr 21, 2009

I didn't get an email from you yet

Anonymous-0 · Apr 22, 2009

I sent it last night. This is not the first time my emails didn't go through on this site.

My 300 has the belt pully. I know you want the core back and I want to let you know the condition before we go forward. Two planetary gears have broken teeth and the carrier has boogered threads where the big nut goes on. I just want you to know so you tell me if you can accept it or not. I still want your TA. We just need to define all aspects of the deal. Email me at [email protected] and we'll close it out. Thanks, Dan

Kevin Meier · Apr 23, 2009

I sent you an email in reference to accepting your core...yes I will in any condition. Not sure if you received my email or not. You can call me at 515-368-0533

Kevin are you out there

Blackland Dan

Member

Kevin Meier

Member

Anonymous-0

Well-known Member

Kevin Meier

Member

Anonymous-0

Well-known Member

Kevin Meier

Member

Anonymous-0

Well-known Member

Kevin Meier

Member

Similar threads