combine motor in 560

Anonymous-0 · Apr 19, 2009

How much hp did the I believe 3o1 combine motor have ? Have a chance to buy a 560 with one in it .

El Toro · Apr 19, 2009

They were around 72 hp in the 560 tractors. Hal

the tractor vet · Apr 19, 2009

A 301 will probably be in the 90 hp range . As for me the 301 is not on the top 10 of my favort's

randy hall · Apr 19, 2009

just put a c-301 from a 715 combine in our 706 and it dyno's ninety horsepower.

Anonymous-0 · Apr 19, 2009

The 301 motor out of a combine the best I can remember was rated 74 hp at 2250 rpm. It is the same motor as the D 282 but the 301 did not have sleeves and was used only on combines. I know some have been put in some 706's but you can't run a 560 at that high of rpm's as a 706 because of the way it is geared. The other thing is the 560 transmission and rear end if you are going to use that much power on the drawbar WON'T hold up. I know first hand

460/560 · Apr 19, 2009

Jerry, my 460 with a bone stock 301 out of 715 makes right at 90hp at about 2400 rpm. Would probably be high 70"s to low 80"s at 1980 rpm. As for the 560 rearend holding up, i"d have to disagree with that one. My 460"s been running strong for about 8 years with a 301, and my 560 holds a 478ci RD motor just fine, so don"t let that scare ya.

combine motor in 560

Anonymous-0

Well-known Member

El Toro

Well-known Member

the tractor vet

Well-known Member

randy hall

Member

Anonymous-0

Well-known Member

460/560

Member

Similar threads