504 hyd lines

Anonymous-0 · Apr 16, 2009

I have a 504 row crop 62 model with bad hoses on the hyd outlets under the gas tank. The hoses are permanently connected to the steel lines that run to the coupler blocks under the gas tank. Can you fasten new hoses to the steel lines or does it all have to be replaced? Thanks DTK. P.S. I will post another ques. later about my 656 D batteries boiling. Thanks DTK.

charles todd · Apr 16, 2009

Do you use the remotes under the tank? I relocated mine to the rear of my 62 Farmall 504.

I am still not satisified with the location and hose routing, but sure like the new rubber hoses and JIC fittings. Better than the old lines and banjo fittings.

Charles

El Toro · Apr 17, 2009

You can braze or silver solder a male fitting with JIC male threads to the steel lines and then use hoses that's like the ones that Charles used with swivel nuts.

You can make them yourself with reusable ends as shown in this picture that I made for the hydraulic lift on my garden tractor. You will need a vise. Hal
PS: You can get 90 or 45 degree elbows or straight ends with swivel nuts.

504 hyd lines

Anonymous-0

Well-known Member

charles todd

Well-known Member

El Toro

Well-known Member

Similar threads