350/450 Frame Weights fit a '44 Farmall H???????

Spring Ridge Farm 1898 · Apr 15, 2009

Would frame weights from a Farmall 350/450 fit a '44 Farmall H???

If so, what would be the best to way to bolt on and what size bolts would be needed.

About how much does each weight weigh?

Thanks for advance for your answers.

Chris NW Ind · Apr 15, 2009

I find that extremely unlikely. The 350/450 frame weights are designed to fit around and bolt to the bolster of those tractors. Your H bolster is quite a bit different. Your only choices are either front wheel weights or fabricating your own weight bracket.

Chris B.

D Slater · Apr 15, 2009

Around 125 pounds each, 2 bolts each side 5/8 diameter course thread 4 inches long screw into threaded holes in bolster.

Andrew Z · Apr 15, 2009

Those weights will fit a Stage II Super H (square front like 300/350) but highly doubt that they will fit a regular H frame.

Andrew

D Slater · Apr 15, 2009

Andrew, Chris, I never put any on a H, but have on a regular M. While the bolsters are not shaped the same on corners I think the mounting holes in bolster are there. IH sold the 350 type bolster later on as a replacement to use for H tractors built from sometime in 1944 on up.

Andrew Z · Apr 16, 2009

Thats a good point i know the front ends will interchange, maybe weights too then... i guess it be a trial and error experience on the H

Andrew

350/450 Frame Weights fit a '44 Farmall H???????

Spring Ridge Farm 1898

New User

Chris NW Ind

Member

D Slater

Well-known Member

Andrew Z

Well-known Member

D Slater

Well-known Member

Andrew Z

Well-known Member

Similar threads