Got a question u all might be able to answer for me. I got a 46"H that is in the shop. The adjustable pulley on the Water pump was froze up, however it still held tention on the belt. SInce the belt was worn, the belt was cut & the water pump was taken off the engine to try to free it up. After being unsuccessful, & took it to a machine shop to let them try thier luck. Looking a parts schematic for the water pump & a bearing & seal/packing numbers. If anyone is familiar with that let me know.
Secondly, I"m wanting to remove the pulley block & cover it with a metal plate. Has anyone ever done this before & any tricks that you can share with me? Thanks
Secondly, I"m wanting to remove the pulley block & cover it with a metal plate. Has anyone ever done this before & any tricks that you can share with me? Thanks
