(800) 853-2651
SHOP NOW

MORE 985 TRANMISSION QUESTIONS

C

chris meredith

Member
ok today i remove teh long side cover on the side of the tranimisson and i found the big rigth under the cover look likeit had been slipping over another gear it was the big gear in the back right under the cover and the best i coudl tell the rest look good do you all think that thac coudl be my problems with it nocking backing up thanks som uch if you all think that is it wat gear is that is it the revers idealer geart or what thanks so much for any help
 
Did you try prying on that gear to see how much the pinion shaft moves? In out or up and down. I still think that you might have a pinion bearing out.
 
I hope that you were prying on the gear and shaft towards the inside and not the one thats exactly right behind the cover. That one would be the reverse countershaft. The other thing you could do is jack up one wheel, watch inside while rolling the wheel, and see if you can get it to make that noise.
 

The only way to really tell is to look for teeth in the trct rear frame and/or pull the cover plate to the range trans. You will need to jack the cab up to actually get it out. I know its a bear because I just finished one. I'm not sure you can get a prybar to the pinion shaft thru the left side cover plate. The counter shaft is right in the way.
 
The range transmission cover comes up without moving the cab. Remove the floor mat, access cover, seat assembly, and transmission shift linkage. That will give you room to lift the cover straight up.
 
You must log in or register to reply here.

Similar threads

I
more JD 2020 questions
Replies
14
Views
930
BillCinNY
B
S
350u manure pump
Replies
8
Views
924
Janicholson
Janicholson
B
6000 project, update #4 (the saga continues)
Replies
19
Views
1K
Bern
B
R
New to Me Case 530 with Questions
Replies
11
Views
881
JGarner
J
J
720 pop out of gear, grinding sound
Replies
3
Views
1K
JLG
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top