IH 1466 Puller

Anonymous-0 · Feb 28, 2009

Does anyone know what a 1466 with press rims and a narrow front would weigh and what can you get for Max HP from a 436 with the factory pump turned up and a 3lm. Thanks

Owen Aaland · Feb 28, 2009

The last 1466 that I had on the dyno to see what maximum HP would be with stock fuel system parts took out the PTO clutch at about 425. Never tried it again after that.

ejr-IA · Mar 1, 2009

Had a 1566 with 436 stock TO4 turbo maxed out pump was 290hp.

Randy in NE · Mar 2, 2009

A stock 1466 is going to be around 11,000+ lbs. Then it is just a matter of how much stuff you want to take off. Like pto, 3-point arms, TA, etc. You can probably get it down to under 9,500 if you work at it. The horsepower depends on if you are going to stick with the 10 mm head on the model 100 or are you going with 11 mm or 13 mm. With a 13 mm head and larger fuel lines you should be able to get in excess of 400 hp. It is just a matter of how much money do you want to spend. I have a buddy that turns his 1466 down to about 250 hp for farming. And that is with the stock 10 mm head.

IH 1466 Puller

Anonymous-0

Well-known Member

Owen Aaland

Well-known Member

ejr-IA

Member

Randy in NE

Member

Similar threads