Janicholson
Well-known Member
The YT sight is having issues. This is in response to the 1456 TA slipping Update. below. JimN
- Thread starter Janicholson
- Start date
the tractor vet
Well-known Member
I gave up tryen and if this makes it thru what ever filters- problems will take up on his problems later .
OP
OP
Janicholson
Well-known Member
I think the TA has a bad lockup clutch and a bad sprague. If not it would not free wheel down hill with that much pressure.
He needs to look at the caseih.com websight at the parts breakdown. Jim
He needs to look at the caseih.com websight at the parts breakdown. Jim
the tractor vet
Well-known Member
My take on this is that with that much pressure on the MCV that either there is a blowen out seal or gskt. and amy be alos a crack in the pickup tube . Now more then likely the T/A is toast . But hey who knows i sure as hello am not there to run some tests and i know he does not have the test spool to install into the MCV to do the tests. And just why is the pressure set to 300 . even on my buddy's 1066 that is way over stock pony power it is set at 275 and has never walked thru the T/A . and believe me she has had extreme field testing.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy