seals for 400 Hydraulic pump

SDE · Feb 27, 2009

The numbers are 994942 and 994842. I called the dealer and they could not find these numbers. They say to bring it down and they will find something for me. I took the pump apart to see if it was in good shape before I install it on the tractor.
I bought this used pump at a dealship auction. Everything looks good, shafts don't show any wear, seals look good too, so should I just put it back together or am I dealing with a inexperienced service man?
Thank you
SDE

scott mcintosh · Feb 27, 2009

I have the part numbers you need send me your phone number to my email at [email protected] I will call you back. Scott

SDE · Feb 28, 2009

I went to the dealer yesterday. The seals and o-rings come in a kit, which is not available anymore. I am going to clean it up and put it back together. If I have a problem with it, I will repost later.
Thank you
Steve

kossuth · Feb 28, 2009

check various bearing houses and hydraulic shops. More than likely if the seals ever go out you can find something through them.

scott mcintosh · Feb 28, 2009

Hoping you would talk to me I have all the separate part numbers for all o'rings and shaft seals for both thompson and pesco pumps. I went through this same run around before with CIH parts people.The numbers I have are up to date with CIH. If email not your thing leave message on my cell #(608)341-6066 I will return your call hate see you put it together all seals and o'rings. Scott

seals for 400 Hydraulic pump

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

SDE

Well-known Member

scott mcintosh

Member

SDE

Well-known Member

kossuth

Member

scott mcintosh

Member

Similar threads