230 hydraulic lines

Matthew Webb · Feb 24, 2009

I have a 230 and one of the hydraulic lines that goes from the front to back was cut and replaced with a hose years ago. I would like to fix it back right.These are not as common as the hydraulic lines on c ,super c. How are the lines held in the block and the manifold? can they be replaced?

georgeky · Feb 24, 2009

I suspect you will have to have those custom made or find one from a salvage yard.

Janicholson · Feb 24, 2009

They are either welded, or brazed into the manifold block. The weld will be tougher to clean up, the braze will come apart with heat. Be sure to use hydraulic system rated tubing W/O seams seamed tubing will split and drop equipment With no warning. A conduit bender may work. but it will be pushing its limits. Making a 3/8" rod template to satisfaction will be a must, Taking the template to a hydraulic shop to have tubing bent is far easier. JimN

Matthew Webb · Feb 26, 2009

Thanks for the info. I checked with a company that makes hyd. lines. they can make the tubes but don"t know if they can install in manifold. I did not get a price yet.

230 hydraulic lines

Matthew Webb

Member

georgeky

Well-known Member

Janicholson

Well-known Member

Matthew Webb

Member

Similar threads