Super A Hydralic Line Repair

wendle · Feb 24, 2009

I have a leak on the tubes where they connect to the flange that fits on the hydralic box, can they be brazed to make the repair?

Joe Dowling · Feb 24, 2009

Yes, a good welder or welding shop should be able to repair your hydraulic lines. I worked in a Blacksmith and Welding shop and we repaired several hydraulic lines similar to yours that had either cracked from vibration or where something had damaged them. They were likely brazed together at the factory.

ScottyHOMeY · Feb 24, 2009

Those on my SuperC show a brazed repair. Not a pretty job, whoever did it, but they work.

Jonathan Mirgon · Feb 24, 2009

My opinion would be to watch e-bay , There is always someone parting one of these out. I saw a set of these lines sell for 10.00 that looked to be in very nice condition. With shipping you can have good functional hydraulic lines that are orginal and weld free for less than a twenty dollar bill. Plus you dont have to worry about when the weld is going to break or start leaking.

Hugh MacKay · Feb 24, 2009

wendle: I've had a number of these repaired, usually brazing, but the last one I had done the guy used a wire feed welder. That welding one was not cracks, it developed pin holes on the pipe, some distance from manifold. Been very happy with results both ways. Lets put it this way, I've never fixed the same spot twice.

wendle · Feb 24, 2009

Thanks guys, I really appreciate the input.
Also would like to mention that I had a friend sell a super c with 2 row cultivators for $500, didn't know he was going to sell it, I told him I was going to kill him. It ran good and everything worked well on it.
Thanks again!

Super A Hydralic Line Repair

wendle

New User

Joe Dowling

Member

ScottyHOMeY

Well-known Member

Jonathan Mirgon

Member

Hugh MacKay

Well-known Member

wendle

New User

Similar threads