560 Farmall Tractor

Ben W · Feb 22, 2009

Where do you check the hydraulic oil on a 560 gas Farmall Tractor?

Hugh MacKay · Feb 22, 2009

Ben: There is a fill to level plug on side of transmission. Probably about 1/3 of distance from bottom towards top. It's been 30 years, however I think it's on clutch side. I may be wrong but it's very close to pedals which ever side.

Curt W · Feb 22, 2009

left side by clutch

Hugh MacKay · Feb 22, 2009

Curt: Thanks on that, I was quite certain, but not 100%.

Ben W · Feb 22, 2009

thankyou

Ben W · Feb 22, 2009

that oil is part of ur hydrolic system and ur tranny torite guys

bc · Feb 22, 2009

Once you have it full, get a stick or tape measure so you can check it from the fill hole from now on. You can also look to see where the level sits on one of the gears. If you have any hydraulic problems, you may want to overfill it by up to 5 gallons with hytran. Measure that level also.

560 Farmall Tractor

Ben W

New User

Hugh MacKay

Well-known Member

Curt W

Member

Hugh MacKay

Well-known Member

Ben W

New User

Ben W

New User

bc

Well-known Member

Similar threads