(800) 853-2651
SHOP NOW

MD injector pump questions

A

Anonymous-0

Well-known Member
Where or is there a drain for the injection pump? I'd like to put fresh oil in in and also want to check to see if there's any diesel in it. There is no fuel pressure guage on this pump. Where does that go?? Must be a place somewhere to thread it into, but I can't see where it is. I'm new to all this, and am intrigued by this machine. Thanks for any help, and also for answering previous questions.
 
on the side pump toward the front of pump there is two plugs one is drain plug one is level plug,as far as the pressure gauge goes it near the top of plunger head in line just below return line. Pressure gauge not available from CIH reproductions are pricey,I use engine oil pressure gauge with mounting studs cut off not original but works great. Good luck Scott
 
Ive got an MD and I took the gauge off cause it was ratty and didnt work anywho.If it runs good I dont care what the fue pressure is! Hoss
 
I was looking at this MD again today and there is no place to put a gauge on the injector pump. Apparently some of the pumps did not have gauges. I thought they did.
 
A lot of the later pumps do not have a gauge. There will typically be a spot for it but not drilled/tapped. Does yours have the A or the IH?
 
You must log in or register to reply here.

Similar threads

D
Y u no bleed Mr injector nozzle 3?
Replies
7
Views
444
560Dennis
560Dennis
J
2350 Injector Pump Removal
Replies
3
Views
353
Justin B66
J
F
1996 dodge Cummins injector pump.
Replies
3
Views
484
Fritz Maurer
F
F
WD9-MD Fuel Filters
Replies
7
Views
702
D Slater
D
T
4020 slow start
Replies
4
Views
265
Tx Jim
Tx Jim
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top