(800) 853-2651
SHOP NOW

Rear hydraulic remote

S

Saw Dust

Member
Hi,
I would like to add a rear remote to my 2444. The bolt on kit for the side of the lift box is nearly impossible to find and incredibly expensive. I would like to plumb one into the FEL valve somehow but I am not sure how to go about it. Any input would be appreciated. I attached a picture of the valve in case that is of some help.

Ian
3177561268_09ef70d71a_o.jpg
 
What are you trying to do? Do you need to use the remote at the same time as the other two functions? If not you may be able to plumb the output of one valve into a splitter (Gresen) valve and switch one or the other. I do that with the bucket tilt control on my loader, and the rear remote used to power a log splitter.
 

You need a spool valve with "power beyond."

Install the valve in a convenient location.
Detach the hose going from the pump to the IN on the FEL valve.
Attach this hose to the IN on your new valve.
Run a hose from the power beyond port on the new valve to the IN on your FEL valve.
Run a hose from the OUT on the new valve to the fill plug (or a level check plug) on your hydraulic reservoir.
Run hoses from the work ports on your new valve to the rear of the tractor.
Install quick disconnects on the ends of these hoses at the rear of the tractor.
 
mkirsch,
Thanks. I feel quite silly now. I kept thinking my FEL valve has no power beyond so how do I make it work. I didn't look at it the other way around. Like you are saying put the new valve first in the chain. Thanks again. That is exactly what I am going to do.


Cheers,
Ian
 
is that picture of your loader valve?

if so, it looks to be the same valves as on a 56 series tractor, you can easily add power beyond to that stack.


karl f
 
Hi Karl f,
Yes it is a picture of my loader valve. Where do I "tap" off for power beyond? I have not been able to find out much information on the valve pictured.

Thanks for your help.
Ian
 
You must log in or register to reply here.

Similar threads

P
hydraulic valve recommendations?
Replies
8
Views
334
cabot
C
S
Hydraulic Remote Valve
Replies
8
Views
364
Sixty7camaro
S
R
Hydraulic remote not working
Replies
0
Views
124
RDW72
R
P
90 Series case remote coupler locations??
Replies
2
Views
353
want@1070
W
J
Advice needed on adding hydraulic remote for quick attach on industrial loader tractor
Replies
10
Views
710
jacks
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top