fast hitch adapt. to three point

lbm · Feb 14, 2009

Is an adaptor for a fast hitch on a super c farmall to use three point equipment ?

glennster · Feb 14, 2009

couple different ways you can go, one is a fixed adapter that bolts to the 3 pt implement, the other are the slip in prongs and add a top link bracket. steiners has both. here is a pic of the fixed adapter on my 240u
<a href="http://s121.photobucket.com/albums/o234/glennster_01/?action=view&current=DSCF1558.jpg" target="_blank">

DSCF1558.jpg" border="0" alt="Photobucket

</a>
Untitled URL Link

GA Dave · Feb 14, 2009

Here's the one on my 240 Utility. The CaseIH online catalog shows them also. David............

LMack · Feb 14, 2009

I have one out in the yard that is a little different than all these and I don't have a ready picture. If you go to the Case/IH online parts catalog they have a picture. If you do not find the pic, send me an email and I will make a picture of mine and shoot it to you.

Redrider · Feb 14, 2009

This Adapter was made by IH. This particular adapter is has 3 inch coupling beams that fit Farmall 300 and up.

RR

Redrider · Feb 14, 2009

I forgot to add the IH part number if anyone is interested it is 523649R1 and is found in the attachment section or your parts book.

RR

Idaho Ron · Feb 14, 2009

Here is a picture of a Super C with a two point to three point. And to your question, Yes they are used on the two point so you can use three point equipment. One problem is a lot of the three point stuff is too wide. Not all three point stuff will work slip fit. Even if you have the converter you might still have to "make" stuff work. Ron

Anonymous-0 · Feb 14, 2009

Mine is very similar to GA Dave's except the "hooks" on the bottom are a little different. Mine have latches with a ring top that can be lifted like the latches on a fast hitch with a tool that you use to reach it from the seat. They will spring load up (or they would if the springs weren't broken), you back into the implement, lift up on the the pins and the latch snaps down. Even though the springs are broken, they will stay up, but just bump them a little and they will fall... takes being real careful to just back in and pick up the pins. Mine has the real short top link as shown. The anti-sway on Dave's looks like chains, but mine is the same as the fast hitch.
It is shown in my parts breakdown, so it's IH.

Chris from Wa · Feb 15, 2009

This is where I got mine. It is a good copy of the original Super C Fast Hitch to 3 point adapter.
Tony Carbaugh

fast hitch adapt. to three point

lbm

Member

glennster

Well-known Member

GA Dave

Well-known Member

LMack

Member

Redrider

Member

Redrider

Member

Idaho Ron

Member

Anonymous-0

Well-known Member

Chris from Wa

Member

Similar threads