super A loader

Keith W · Feb 12, 2009

Does anyone know if they made a front end loader to fit a super A. If so could soneone post a picture.___Keith

Hugh MacKay · Feb 12, 2009

Keith: There were at least 3 different loaders for these offsets. I don't have any photos. Two of them were conventional type loaders and the other was a one arm loader. All will fit every tractor from SA to 140.

I personally wouldn't do it, front end on those little tractors is just too light. Just my opinion, I wouldn't put a loader on any tractor.

Mark Peters · Feb 12, 2009

Keith, Go to "Tractor Photo`s" link on left side of this page and type "1000 loader" in the search box. Quite a few 130`s and 140`s with the IH 1000 loader which is the 1 arm type that Hugh alluded to in his postThey are scarce and VERY pricey (around $1500).There was a Wagner and a Henderson also, i believe.You could try that in the tractor photo`s search also.

Anonymous-0 · Feb 12, 2009

They made at least one aftermarket as well as the single arm IH model. I had one on the SA and took it off to rebuild. Must be either the peviously mentioned Wagner, or Henderson. The machine was at a fertilizer plant and they were a little hard on the tractor. Fine shape now after a lot of work, but am leaning towards not reinstalling the loader.

Keith W · Feb 13, 2009

Thanks for the reply ----- Keith

brfarmall · Feb 16, 2009

keith i have one on my 1940 a it is made by kelly its a model 400 2 arm loader,with trip bucket,works good but is a little heavy with a full bucket of dirt even with weights

super A loader

Keith W

Member

Hugh MacKay

Well-known Member

Mark Peters

Member

Anonymous-0

Well-known Member

Keith W

Member

brfarmall

New User

Similar threads