Which IH tractors had this rear wheel bolt pattern?

John_PA · Feb 4, 2009

8 bolt, 6 inch center hole, 8 inch (center to center) spacing on the lug bolt holes.

I was wondering if these are the same type that fit on a 460.

The wheels are off the front of an IH 205 combine. I was told they are the same as the gleaner combine and woudl be the same for the Allis Chalmers WD, WD-45

Thanks,
John

Anonymous-0 · Feb 4, 2009

Allis uses a six bolt like an F20 or a 300U.

LenND · Feb 4, 2009

I think the WD and WD45 have eight hole wheels cause the wheels off of my 95 JD combine will bolt right on. And they 26inch and eight hole.

John_PA · Feb 4, 2009

Thanks for the information. It looks like the only thing they will fit is the WD and WD45. I looked through a bunch of pictures of IH tractors, and it looks like none of them have the same bolt pattern. So, I am wondering if IH used Allis Chalmers design in their combine.

Anonymous-0 · Feb 4, 2009

You are right, I was thinking about a WC.

Owen Aaland · Feb 5, 2009

My 2444 is able to use the combine wheels. The off set is different so I can't use chains as they would hit on the fenders.

Which IH tractors had this rear wheel bolt pattern?

John_PA

Well-known Member

Anonymous-0

Well-known Member

LenND

Well-known Member

John_PA

Well-known Member

Anonymous-0

Well-known Member

Owen Aaland

Well-known Member

Similar threads