Farmall M Trans Seals

Zach Bouchard · Jan 26, 2009

I have a farmall M leaking out of the transmission where they always do. I DON"T have a belly pump. what is the procedure to get them out after i take the cover off? I think there are two seals. Does anyone know the NAPA part numbers are?

Clarkbug · Jan 26, 2009

I havent done it, but I would imagine its just like pulling any other seal on these old machines. A seal puller might work, or you may have to use a punch to drive them out.

If you got to the NAPA Pro-Parts webpage, you can do a cross reference for the seals there, it should bring up the numbers you are after.

Anonymous-0 · Jan 26, 2009

See IH country Boy's post. I think you're talking about the same thing. Try not to destroy the old seal and a place such as Purvis bearing can match them up. All they need is the # on the seal. About $6.00.

Farmall M Trans Seals

Zach Bouchard

Member

Clarkbug

Member

Anonymous-0

Well-known Member

Similar threads