m&w live hydraulic pump

rtb321 · Jan 25, 2009

does anyone know what # seals i need for the dist. side and the eng. side? it is a m&w pump on a m, and it leaks like a sieve. i'm hoping someone out there will have a national, or cr # for them. i could pull them and measure them but i was hoping to pull it, and fix it right away without making a parts run, if thats ever possible.

the tractor vet · Jan 25, 2009

If it is leaking that bad i doubt that a couple new seals will heal it as the bushing in the pump are probably toast So it just maybe time for a new replacement pump.

rtb321 · Jan 25, 2009

nothing is ever simple is it?? it leaks pretty bad into the dist. the pump works great other than that, so if i need to make bushings i will. too many $$$ to replace it. the pump would probably cost more than the tractor did. on the bright side, i have no problems with moisture in the dist. cap :wink:

CNKS · Jan 25, 2009

Tractor Vet is probably correct, but pull the seals, take them to a seal bearing place and replace them. You will only have lost $10-$20 if they don't work.

m&w live hydraulic pump

rtb321

Member

the tractor vet

Well-known Member

rtb321

Member

CNKS

Well-known Member

Similar threads