I must be doing something wrong

JohnPawlicki · Jan 23, 2009

I need to change the Clutch on my Farmall H. I read this from one of the posts

======
Cool. If not you might need to remove the belly pump from the bottom, and remove the clutch. All can be done from underneath. use the Search for box to find procedure for changing the clutch, and more on stuck clutches, and pilot bearings. JimN

=====
I tried to search the Forum for this but cannot find it. Does anyone have a link to this procedure JimN speaks of

Anonymous-0 · Jan 23, 2009

There should be a ton of stuff in the forum about that. Sometimes when I do a search, it jumps out of the Farmall Forum and goes to Store. Put what you want in the "search for" box, and make sure the "hop to" box stays at Farmall forum.

mkirsch · Jan 23, 2009

John, don't worry about asking any questions you may have. This particular job I can speak on from first hand experience.

Frankly the most difficult part of the process is getting the input shaft out and back in. It's a tight fit and will only slide by in the exact right position. You may get frustrated and claim it won't go, but keep at it. It'll go.

I must be doing something wrong

JohnPawlicki

New User

Anonymous-0

Well-known Member

mkirsch

Well-known Member

Similar threads