F12 Mag Need Help

Anonymous-0

Well-known Member
I have only fooled with two mag's before this one,an Oliver 70 and a F14. On those I timed them bolted them in place and everything was fine, however when I bolt this one in place the dogs or the little blocks of metal do not go together to turn the mag. I can unbolt the mag and slide it toward the radiator 1/4 inch and it will work fine. What is wrong and what do I need to do to correct this problem? Thanks
 
Forgive me if I'm asking an obvious question, but do you hav the fiber drive disk that goes between the mag drive and the gear drive from the cam?
 
That has got to be what is wrong. Bought tractor without mag, then bought mag somewhere else got in hurry and forgot to think. Thank you very much.
 
Too fast guys! Was trying to find it in my parts book. It shows 2, one up to 997something, something. (brain forgot that fast) and another after that.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top